 |
 |
 |
 |
 |
|
| MAIN PAGE > PRODUCTS > HT-439 > MATERIAL SAFETY DATA SHEET | BACK ONE |
|
|
|
|
|
|
SECTION I Identification Manufacturer: Hydrochemical Techniques Inc P.O.Box 2078 Hartford, Connecticut 06145 Product Name: Hydroclean HT-439 Heating and Air Conditioning Coil Cleaner & Brightener Emergency Telephone Number: (800) 278-7681 Date Prepared: June 25, 1999 |
|
SECTION II Hazardous Ingredients Chemical Name: Phosphoric Acid 85% - CAS Number 7664-38-2 - % 23.0-35.0 - TLV (UNITS) 1000 PPM Nitric Acid - CAS Number 7697-37-2 - % 1.0 - TLV (UNITS) 2 PPM 2-Butoxyethanol - CAS Number 111-76-2 - % 2.0-5.0 - TLV (UNITS) 50 PPM |
|
SECTION III Physical Data Boiling Point (°F): 200° Vapor Pressure (mm Hg): 0.6 Vapor Density (Air = 1): Not Available Solubility In Water (20°C): 100% Appearance & Odor: Clear Amber, Slightly Acidic Specific Gravity: 1.03 Percent, Volatile/Volume: 70% Evaporation Rate: Not Available pH: 3.8 |
|
SECTION IV Fire & Explosion Hazard Data Flash Point (Method Used): Nonflammable Flammable Limits: Not Applicable Extinguishing Media: Not Applicable Special Fire Fighting Procedures: Wear NIOSH/MSHA approved self-contained breathing apparatus. Wear a full face piece operated in demand or other positive pressure mode and full protective clothing when fighting fires. |
|
SECTION V Health Hazard Data Threshold Limit Value: 50 PPM Effects of Overexposure: Extreme exposure may cause irritation of eyes and respiratory passage. Liquid contact with eyes can cause burns. Skin contact can cause irritation. Emergency & First Aid Procedures: Inhalation - Move victim to fresh air. Skin - Flush with water for 15 minutes. Eyes - Flush eyes for 15 minutes with water, then use a mild eye rinse containing Sodium Bicarbonate. Get prompt medical attention. |
|
SECTION VI Reactivity Data Stability: Stable Incompatability (Materials to Avoid): Avoid contamination with alkalis. Hazardous Decomposition Products: Not Available Conditions to Avoid: Contact with strong alkaline solutions or unknown solutions. |
|
SECTION VII Spill, Leak or Waste Disposal Procedures Spills or Leaks: Contain spilled areas with dikes, etc. Neutralize with soda ash and wash down area with plenty of water. Product is completely biodegradable. Waste Disposal: Neutralize with soda ash or lime. Flush residue in accordance with all State and Federal regulations. Product is completely biodegradable. |
|
SECTION VIII Special Protection Respiratory: Product is for interior and exterior use. If concentrations should exceed 50PPM, use NIOSH/MSHA face respirator. Ventilation: Provide proper ventilation to keep exposure below the threshold limit value (50PPM). Gloves: Wear acid resistant gloves. Rubber, neoprene or PVC. Eye: Wear full face plastic face shield or goggles. Other Protective Equipment: Hard hat, acid resistant jacket, trousers and boots. |
|
SECTION IX Special Precautions Handling & Storage: Store in a cool place and handle with protective equipment. Never add acid or anything other than water to this product. Other Precautions: Keep quick drench facilities on job site and eyewash solution containing Sodium Bicarbonate. |
|
| MAIN PAGE > PRODUCTS > HT-439 > MATERIAL SAFETY DATA SHEET : TOP |
|
 http://www.hydroclean.com All information and photos are copyright Hydroclean. No material may be reproduced without express written permission from Hydrochemcial Techniques, Inc. HYDROCLEAN Hydrochemical Techniques, Inc. PO Box 2078 Hartford, CT 06145 Tel: 800-278-7681 • 860-527-6350 Fax: 860-527-4067 info@hydroclean.com |